Level transmitter : Series FBLT flush tip submersible Level Transmitter DWYER

Perfect for Sludge and Slurries, Lightning Protected, ±0.25%Accuracy, Slim Body

Designed with a flush diaphragm tip that will not clog in harsh applications such as sewage lift stations

Service:	Compatible liquids.
Wetted Materials:	Body: 316 SS; Cable: Polyether polyurethane or ETFE; Diaphragm: PTFE coated FKM fluoroelastomer; Label: Polyethylene polyamid.
Accuracy:	±0.25% FS (10' w.c. range is ±0.30% FS).
Temperature Limits:	-4 to 176°F (-20 to 80°C).
Compensated Temperature Limits:	32 to 140°F (0 to 60°C).
Thermal Effect:	±0.0075%/°F (±0.0135%/°C).
Pressure Limit:	2x range.
Power Requirements:	10 to 33 VDC.
Output Signal:	4 to 20 mA DC 2-wire.
Response Time:	< 50 ms.
Max Loop Resistance:	1000 Ω @ 30 VDC.
Electrical Connections:	Wire pigtail.
Mounting Connection:	Suspended below point being monitored.
Electrical Protection:	Surge/lightning protected per EN61000-4-5, Class 5.
Weight:	Body: 0.3 lb (0.136 kg); Cable: 0.037 lb (0.017 kg) per foot.
Agency Approvals:	CE.

Flush diaphragm tip will not clog in harsh applications
Maintenance free filter eliminates particulate or water droplets from entering the transducer
Comes with a choice of polyether polyurethane or ETFE cable materials for excellent chemical compatibility
Incorporates lightning and surge protection, eliminating both power supply surges and lightning ground strike transients (surge protection is not guaranteed and is not covered by warranty)
Narrow body design allows the FBLT to fit into stilling wells and narrow installations
Robust FKM fluoroelastomer diaphragm that is PTFE coated for a stick resistant surface holds up in aggressive fluids
Diaphragm cavity is filled with a gel that will not leak out versus oil or grease
Optional NPT connection allows the unit to be rigidly installed in a pipe/conduit, or the addition of the A-625 hanging loop for attaching a chain for pulling out of the installation