English English Tiếng Việt Tiếng Việt

Explore this product

Carbon monoxide transmitter and switch: Series CMS300 DWYER

Current/Voltage Selectable Output, Jumper Selectable SPDT Relay Contact

Application

  • Garage or loading dock ventilation
  • Vehicle maintenance facilities
  • Mechanical room monitoring
CMT200_CMS300_Catalog CMS300_Manual (+84) 903 999 357

The Series CMS300 Carbon Monoxide Transmitter and Switch provides a field selectable current or voltage output that is proportional to the carbon monoxide concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms.

Detail Up to top

Specification

Sensor:Electrochemical, 5 years typical lifespan
Range:0-300PPM
Output Drift:<5% per year in air
Temperature Effect:2% over range
Coverage Area:7,500 ft2 (700 m2) or 50 ft (15 m) radius
Accuracy:±5 PPM or 5% of reading for 0-300 PPM (whichever is greater)
Resolution:1 PPM
Temperature Range:-4 to 122oF (-20 to 50oC)
Storage Temperature:For best sensor life, 32 to 68oF (0 to 20oF)
Humidity Range:15-90%RH constant; 0-99% RH intermittent
Response Time:<45 seconds to 90% of final value
Calibration:15 turn span and zero adjustment potentiometers
Housing:UV resistant glass filled polycarbonate
Analog Ouput:Jumper selectable 4-20 mA (loop powered) or 2-10 V (max. Load 2k Ω)
Enclosure Rating:IP64
Weight:1 lb (0.45 kg)
Switch Type:Single-pole double-throw (SPDT)
Electrical Rating:30 VAC/VDC. N/O = 5 A. N/C = 3 A
Set Point:Jumper selectable 25, 60, or 150 PPM
Set Point Differential/Hysteresis:3% of scale
Relay Action:Factory set for direct acting
Agency Approvals:Sensor is UL recognized component for ANSI/UL-2034, UL-2075, E340403, CE

Feature

  • Field selectable current or voltage analog outputs
  • Integral SPDT relay contact for low or high alarm
  • Jumper selectable alarm set points of 25, 60, or 150 PPM
  • UL recognized carbon monoxide sensing element
  • Field calibration kits

Related products Up to top

The Series CDT Carbon Dioxide and Temperature Transmitters accurately monitor the CO2 concentration and temperature in indoor environments to help achieve energy savings. Carbon dioxide/temperature transmitters: Series CDT DWYER Explore now
The Model CDSN Carbon Dioxide Transmitter accurately monitors the CO2 concentration and temperature in schools, office buildings, and other indoor environments to help achieve LEED® certification and energy savings Model CDSN Carbon Dioxide Transmitter Explore now
The SERIES RHP-E/N Wall Mount Humidity/Temperature/Dew Point Transmitter is the most versatile room transmitter on the market. The stylish housing is well vented to provide air flow across the sensor to improve measurement accuracy. Humidity/Temperature transmitter: Series RHP E/N DWYER Explore now
The SERIES RHP Temperature and Humidity Transmitter combine the voltage or current humidity transmitter output with a passive temperature thermistor or RTD output. Humidity / Temperature Transmitter: Series RHP DWYER Explore now
THE SERIES GSTC Carbon Monoxide/Nitrogen Dioxide Gas Transmitter monitors the gas concentration in underground parking garages and loading docks. The carbon monoxide transmitter is used to measure the exhaust of gasoline engines, while the nitrogen dioxide transmitter is used for diesel engines. Carbon monoxide transmitters: Series GSTA & GSTC DWYER Explore now
The MODEL CMT200 Carbon Monoxide Transmitter provides a field selectable current or voltage output that is proportional to the gas concentration in underground parking garages, vehicle maintenance facilities, or mechanical rooms. Carbon monoxide transmitters: Model CMT200 DWYER Explore now
The SERIES CDTR Carbon Dioxide, Relative Humidity and Temperature Transmitters reduce the number of sensors mounted on a wall or in a duct. Carbon dioxide transmitters: Series CDTR DWYER Explore now
Omnidirectional Occupancy Sensor, range: OSC-200: 34.4´ (10.5 m) diameter at 13.8´ (4.2 m) mount height; OSW-100: 49.2´ (15 m), viewing angle: OSC-200: 360°, OSW-100: 110° Occupancy sensor: Model OSC-200 & OSW-100 DWYER Explore now
The SERIES CDTA Communicating Carbon Dioxide Detector combines the function of three room sensors into a single, compact housing. Parameters include carbon dioxide, humidity, temperature, and temperature set point with override. Carbon dioxide transmitters: Series CDTA DWYER Explore now

HEADQUARTERS

Address: 729 Ba Thang Hai St., Dien Hong Ward, HCM City

Email: info@bkic.vn

Website: https://bkic.vn

HỒ CHÍ MINH OFFICE

Address: No. 4, Street 59, Binh Trung Ward, Ho Chi Minh

Phone: (+84) 903 999 357

Email: info@bkic.vn

Website: https://bkic.vn

HÀ NỘI OFFICE

Address: No. 35, Lane 45, Tran Thai Tong Street, Cau Giay Ward, Ha Noi

Phone: (+84) 915 141 176

Email: info@bkic.vn

Website: https://bkic.vn

Explore this product

Our clients

UNICONS
SEAREFICO
COTECCONS
REE M&E
Nam Long
Sovico
Taiki-Sha
Shimizu
Kinden VietNam
Vincom
Vinpearl
Vinmec