JONIX MATE Air Sanitization devices

Cold Plasma Technology for indoor air decontamination, to protect our health and improve environmental comfort.

Hospital Healthcare Sector:

JONIX Mate air sanitization devices with Cold Plasma technology are used to sanitize and decontaminate both air and surfaces.

Ionising modules	2 individually supervised
Inoisers replacement	Every 14000 hours
Ionisers maintenance	Every 7000 hours
Pre filter	G4 - Coarse dust filter EN 779:2012
Secondary filter	F7 - Fine dust filter EN 779:2012
Main filter	H13 - HEPA filter EN 1822:2009
Fan	Low-pressure EC brushless centrifugal plug fan with backward-curved blades
Min Air flow (m3/h)	500
Max Air flow (m3/h)	3000
Air circulation	Upflow
DP sensors	3: one for each filter
Fresh air connection	Up to 7% of total air flow Placed on the bottom of the device
Display	7" or 13" touch screen
Dimensions (mm)	678 x 700 x 2035
Weight (kg)	175
Power supply	230 V/ ~ 1 / 50 Hz
Max power absorption (W)	800
Full load ampere (A)	3,5
Noise (dBA)	48,1 (1000 m3/h) - 61,3 (3000 m3/h)

The device functioning can be operated on a continuous basis or in cycles based on specific needs:

Contaminated environment decontamination cycle vol. 800 m3 with maximum air flow from 120 minutes.
Contaminated environment decontamination cycle vol. 150 m3 with maximum air flow from 60 minutes.
Contaminated environment decontamination cycle vol. 50 m3 with maximum air flow from 30 minutes.
Sanitization continuous cycle set the air flow 20 times higher to the environment volume.

JONIX Mate is a unit of mobile filtration and sanitization, with cold plasma technology. It is immediately operational after installation, requiring no further operations.
JONIX Mate uses no chemical products and produces no residual substances.
JONIX Mate is simple and intuitive, from the touch screen it is possible to set and control functions, check on the use of perishable components.