Gas / CO Detector: AGS Series AECL

Once the leaks are detected, the Detector will send an alarm signal to activate the siren and LED indicator to alert users to manually switch off the gas valve and take necessary action to avoid any possible loss.
AGS_data sheet AGS_Instruction Manual +(84) 839 606 568

The Gas / CO Detector is a standalone device designed for LNG and LPG measurements or LNG with CO measurement. The Gas / CO Detector can install on a wall or ceiling where gas leaks might happen near the gas stove, bottled gas, water heater in the kitchen, or other locations of the factory, warehouse, basement, indoor parking, etc.

Detail Up to top

Specification

Model:AGS-132AGS-142AGS-332AGS-432
AGS-232AGS-242AGS-342AGS-442
Gas typeLNGCOLNG/CO
LPG
Detecting elementCatalytic combustionElectro-chemicalLNG: Catalytic combustion CO: Electro-chemical
Alarm levelLPG/LNG: Low explosion limit (LEL) 1/10~1/4, alarm will be activated after LNG/LPG level reaches the set point for 25 sec.(Conform UL1484 standard)LPG/LNG: Low explosion limit (LEL) 1/10~1/4, alarm will be activated after LNG/LPG level reaches the set point for 25 sec. (Conform UL1484 standard)    CO:70ppm = 60~240min., 150ppm = 10~50min.,  400ppm = 4~15min. (Conform UL 2034 standard)
AlarmRed LED blinks, siren is activatedLNG: Red LED blinks, siren is activated CO: Orange LED blinks, siren is activated
Alarm VolumeOver 90dB
Signal OutputDry contact, relay outputPulse + relay outputDry contact, relay
Pulse + relay output
Relay contact CapacityAC125V 12A, DC30V 7A
Warm-up time40 secs. after switching on power
Power supplyAC 110V or AC 220V or DC 12~30V
Power consumptionStand-by: 2W; Alarm: 2.5W
EnvironmentalTemperature: -10 ~ +50℃; Humidity: 0 ~ 95%RH
CertificationCE
IP ratingIP30
InstallationWall mount
Dimensions (mm)120 (H) x 71(W) x 40(D)
Weight300g
Note:
  • UL1484 (Residential gas detectors): In order to avoid false alarm, no alarm should be activated when gas level is lower than 1/100 (LEL). The alarm range should be between 1/100~1/4 (LEL).
  • UL2034 (Single and multiple station Carbon monoxide alarms): When carbon monoxide level is 70ppm - alarm has to be activated between 60~240 min; 150ppm - alarm has to be activated between 10~50 min; 400ppm - alarm has to be activated between 4~15 min

Feature

  • Measurement: LNG, LPG, CO
  • Installation: Wall-mount, Ceiling-mount
  • Power supply: AC 110V / 220V or DC 12 ~ 30V (optional)
  • Utilize the advanced detecting element to ensure data reliability.
  • Equip with power and 2-step LED indicators.
  • Stand-alone or applicable to security systems.
  • CE Certification.

Related products Up to top

HEADQUARTERS

Address: 729 Ba Thang Hai St., Dien Hong Ward, HCM City

Email: info@bkic.vn

Website: https://bkic.vn

HỒ CHÍ MINH OFFICE

Address: No. 4, Street 59, Binh Trung Ward, Ho Chi Minh

Email: info@bkic.vn

Website: https://bkic.vn

HÀ NỘI OFFICE

Address: No. 35, Lane 45, Tran Thai Tong Street, Cau Giay Ward, Ha Noi

Email: info@bkic.vn

Website: https://bkic.vn

Our clients