VTS Fan coil unit

Cooling capacity :1.8 ÷ 12.6 kW Heating capacity: 2.7 ÷ 18.9 kW Air Flow : 340m³/h ~ 2380m³/h 9 Type - ESP: 30/50Pa

Application

Super-thin body
Energy saving
Low noise
Reliable and long lifetime.

+(84) 839 606 568

Elegant and lightweight, compact structure. Ultrathin design enables the unit to be installed in a relatively narrow space.
The Symmetrical design structure it is easy to change the unit from left (right) water tube connection to right (left) connection and with a changeable air return plenum, make it easy for installation and changing the air return direction from backside to downside or from downside to back side.
Highly efficient heat coil is manufactured by mechanically expanded copper pipe with open-window hydrophilic aluminum fins to make heat change more efficient. Heat transfer efficiency is strengthened by large diameter of the impeller fan air supply.
With the low speed wide wheel forward curve centrifugal fan and low noise axis, the fan coil unit is running under an extremely quiet operation.
One molding condensate drain pan without weld and solders joints; Flame retardant type thermal insulation is pasted in water plate, absolutely prevent the phenomenon of water leakage. Specifically designed drain pan with a certain slope ensures rapidly discharging of condensate water.

Detail Up to top

Specification

High energy efficiency: High efficient heat coil is manufactured by mechanically expanded copper pipe with open-window hydrophilic aluminum fins with state-of-art techniques. The strengthened air supply of the large diameter impeller fan makes the maximum heat transfer efficiency of the unit.
Intergrated models: with air flow 340~2380m3/h, and cooling capacity 1.8~12.6 kW, with back return plenum, or with down return plenum, or without air return plenum. Meet all the possible applications, 30Pa, 50Pa ESP. Extended drain pan, stainless steel drain pan is optional.
Low Noise: use the latest wide wheel and low speed forward-curved blades, dynamically balanced and adjusted with the motor, plus the high performance low noise bearing. The Unit casing is equipped with good noise eliminate insulation materials. Thus lead to a lower noise than the conventional products.
Symmetrical design, easy installation: The unit has been carefully designed with a changeable air return plenum, thus it can be easily changed as simply as with screw driver only. From backside to downside air return or from downside to backside air return.
Symmetrical design, it is easy to change the unit from left (right) water tube connection to right (left) connection.
High Efficiency AC motor: High quality AC motor works with reliable bearings. Fan and motor are preciously adjusted for dynamic balance before leaving the factory.
International professional fan: fan manufacturer with stable quality and reliable character with routine dynamic balance precise debug.
Fan runs stably and quietly.Heat Exchanger Complex.Hydrophilic aluminum fin to wear high quality cooper tube, high heat exchanging efficiency large heat exchanging area, low pressure dropping, large cooling and heating capacity. High quality material copper can support big water pressure.
Water collection tray.
Tensile plate with high-grade, smooth surface spray, corrosion resistance, anti-rust; Adopt the overall thermal insulation, in order to avoid secondary condensate drip tray.Two-way diversion mouth slope shape design, condensate water speed, reduce the water remain inside the tray, effectively reduce the rate of bacterial growth.
Return Plenum and Washable Nylon Filter: Changeable air return plenum can be done easily at job-site with screw driver only.(backside to downside air return or downside to backside air return).Product is equipped with washable nylon filter if with air return plenum, Aluminum filter is optional.
Leakage-tight Header: This safe and secure header structure is perfectly designed, aiming at totally leakage-free and durable operating performance.