Switches: Series DX DWYER

NEMA 4X Enclosure, Low Differential Set Points

Application

Indicating filter differential pressure. For example initiating water filter backwash as the filter becomes clogged on increasing differential pressure.
Proof of flow indicator monitoring differential pressure from a sensing device. For example sensing the pressure across an orifice plate to prove water flow.
Proving flow through a pump by sensing the pressure across the pump to make sure the pump does not run dry

DX_DP_Catalog DX_iom

(+84) 903 999 357

Differential Pressure Switch, pressure limits: 200 psig (13.8 bar), enclosure rating:weatherproof UL type 4X (IP65).

Detail Up to top

Specification

Service:	Compatible gases and liquids.
Wetted Materials:	Connection: Brass; Diaphragm: Fluoroelastomer.
Temperature Limits	30 to 140°F (-1 to 60°C).
Pressure Limits:	200 psig (13.8 bar). Continuous single side only pressure should not exceed 1.25 x full differential range.
Enclosure Rating:	Weatherproof UL type 4X (IP65).
Repeatability:	±2% of full range.
Switch Type:	SPDT snap switch.
Electrical Rating:	5 A @ 125/250 VAC, 5 A res. @ 30 VDC.
Electrical Connection:	Removable terminal block.
Conduit Connection:	0.871" diameter hole for 1/2" conduit fitting.
Process Connection:	1/4" NPT female.
Mounting Orientation:	Ports on horizontal plane, ±10°
Set Point Adjustment:	External screw.
Housing Materials:	Body: Aluminum; Housing: Polycarbonate; Cover: 300 SS.
Vibration and Shock:	Set point repeats after 2.5 Gs, 5 to 500 Hz. Set point repeats after a 15 Gs, 10 millisecond duration.
Altitude Limit:	6560 ft (2000 m).
Humidity Limit	80% (non-condensing).
Pollution Degree:	2.
Environment:	Intended for indoor and outdoor use.
Weight:	1 lb 3 oz (0.54 kg).
Agency Approvals:	CE, cULus.

Description: The Series DX is a differential pressure switch that makes a contact output based on the differential between two pressure sources. Wetted materials of brass and flouroelastomer are suitable for use with most gases and water based solutions. The switch can be used for low differential pressure indication with set point on a decrease of pressure as low as 1 psid (0.07 bar). Differential set point ranges are available from 2.5 to 75 psid (0.17 to 5.17 bar) on increasing differential pressure and 1.0 to 67 psid (0.07 to 4.62 bar) on decreasing differential pressure. Unit features a high static pressure rating of 200 psig (13.8 bar). Weatherproof, UL type 4X, enclosure for dust laden, outdoor, or wash-down installation environments. Externally adjustable set point, integral mounting flange and a removable electrical terminal block for quick and easy installation.